Smart Filters with integrated Contamination Monitoring System (CMS)

The growing demand for Condition Monitoring solutions and the successful application of depth filtration on hydraulic and lube oils systems have lead to the development of RMF Off-line filters with an integrated Contamination Monitoring System (CMS). This development allows machine operators to keep their hydraulic oil clean and monitor the contamination levels real time. The Contamination Monitoring System (CMS) can be combined with the entire selection of off-line filters in the RMF Systems range.

The low cost CMS has 8 channels for solid contamination measurement and a Moisture (RH) & Temperature option. It reports in any of the international standard formats ISO 4406:1999, NAS 1638, AS 4059E and ISO 11218.

RMF Systems Smart Off-line filters are characterized by their extremely efficient filter elements with a fineness of 0.5 micron. If required different micron sizes are available to suit any specific application. The Smart Off-line filters can also be equipped with special water absorbing pre-filters in case of extreme water contamination. These water absorbing spin-on cans will remove most of the water prior to the fluid reaching the cellulose element.

Specially designed for industrial hydraulic installations, the RMF Smart Off-line filters are available in single or multiple housing configurations. The Smart Off-line filter units can be easily mounted to new and existing hydraulic installations. An integrated pump-motor unit in the Off-line filter, pumps the oil from the reservoir through the filter unit. After filtering the oil is returned to the tank.

Download documentation from the download section.

Integrated Contamination Monitoring System (CMS)
The CMS in-line contamination monitor automatically measures and displays particulate contamination. It also measures moisture and temperature levels in various hydraulic fluids where ongoing measurement or analysis is required.

Measures and displays the international standard formats ISO 4406:1999, NAS 1638, AS 4059E and ISO 11218
• 8 Channels solid contamination measurement
• Moisture (RH) & Temperature option
• 9-36 Volt DC
• Large backlit display and keypad
• Multicolour LED status alarms
• Programmable test times
• Manual/ Auto operation
• Programmable alarm relays
• PC/ PLC Operation
• Windows based software included
• RS 485 communication standard (other standards on request)
• Manual, automatic and remote control flexibility
• Data logging and 4000 test result memory

Download documentation from the download section.